Injector rebuilders in the area

[Guardsman]

Anybody know of a place in the general area that rebuilds and flow checks injectors? Thanks.

[Camaro_SS/R]

You may try LJ

<snip>
One other tidbit - Acceleronics now owns a fuel injector flow bench so we can clean, rebuild, and flow check injectors. We're also working on a source for low impedance injectors so we can sell a VersaFueler/injector bundle for a package price. Watch this space!
__________________
LJ
http://para.noid.org/~lj
http://www.acceleronics.com

<snip>

[Guardsman]

How much to rebuild and flow check a set of 24lb LT1 injectors?

[WHYT LIE]

Originally posted by Guardsman
How much to rebuild and flow check a set of 24lb LT1 injectors?

I don't think LJ is setup yet to test them, and I don't know if he will be rebuilding them.

But minumum charge for testing/cleaning injectors is usually $8-$25 per injector. At that point finding a set of low mileage stock 24# injectors is the smart choice.

Even NEW SVO 24# injectors don't cost much and are a MUCH better product then the stock LT1 injectors.

[Camaro_SS/R]

Agree. If you are just rebuilding stocks injectors it is probably not worth it.

I do have a set off my 96 SS that I know works good. It has 20 kmiles on it. You can have it for $65 shipped.

--Hugh

[WHYT LIE]

Originally posted by Camaro_SS/R
Agree. If you are just rebuilding stocks injectors it is probably not worth it.

I do have a set off my 96 SS that I know works good. It has 20 kmiles on it. You can have it for $65 shipped.

--Hugh

Hey Matt, that is a STEAL. Grab them up and be happy.

[Guardsman]

I already have a set of 24lb injectors (thanks though), off a 95 Vette LT1. I just wanted to get them rebuilt, etc., before I put them on, make sure they're not spraying goofy, etc. I've just come to not trust anything that comes out of the factory anymore. Thanks. Matt

[WHYT LIE]

Originally posted by Guardsman
I already have a set of 24lb injectors (thanks though), off a 95 Vette LT1. I just wanted to get them rebuilt, etc., before I put them on, make sure they're not spraying goofy, etc. I've just come to not trust anything that comes out of the factory anymore. Thanks. Matt

Then buy a set of 24# SVO unit's from Summit for $200ish.

[Dame94]

matt if ya want some 26's lemme know they are out of the bigbird

Dame

[ViciousZ]

I already have a set of 24lb injectors (thanks though), off a 95 Vette LT1. I just wanted to get them rebuilt, etc., before I put them on, make sure they're not spraying goofy, etc. I've just come to not trust anything that comes out of the factory anymore. Thanks. Matt

I had my 24 lbs done by Cruzin Performance about 2.5 years ago. I had to ship them out, but they did an excellent job, it was well worth it. I paid $8 per injector to have them cleaned and flow matched. The set I sent them was pretty uneven on flow numbers, so CP swapped some of mine out with some in their inventory so that the flow #s were all within 2%. You can check out their web page at http://www.cruzinperformance.com
Talk to Rich.

[WHYT LIE]

Originally posted by ViciousZ
[b]

I had my 24 lbs done by Cruzin Performance about 2.5 years ago. I had to ship them out, but they did an excellent job, it was well worth it. I paid $8 per injector to have them cleaned and flow matched. The set I sent them was pretty uneven on flow numbers, so CP swapped some of mine out with some in their inventory so that the flow #s were all within 2%. You can check out their web page at http://www.cruzinperformance.com
Talk to Rich.

That is an AWESOME deal. Sounds like good customer service as well.

I've seen companies want upwards of $40-$50 to clean and "flow match" injectors... per injector.

[Guardsman]

ViciousZ, cool, thanks for the info.

Damian, I'll have to wait and see if an L36Edit ever comes out before I go to 26 lb injectors. A few V6 guys have tried them, and said they work alright, but totally f*** up the cold idle, making starting difficult, because they run so rich.